OpenBSD 4.4-current (tyrone) #0: Fri Dec 26 09:13:25 CST 2008 root@tyrone.azbsd.org:/usr/src/sys/arch/i386/compile/tyrone cpu0: Mobile Intel(R) Pentium(R) III CPU - M 1200MHz ("GenuineIntel" 686-class) 1.20 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 1072115712 (1022MB) avail mem = 1028476928 (980MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 03/01/04, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf7760 (58 entries) bios0: vendor Dell Computer Corporation version "A12" date 03/01/2004 bios0: Dell Computer Corporation Latitude C400 apm0 at bios0: Power Management spec V1.2 apm0: battery life expectancy 100% apm0: AC on, battery charge high, charging, estimated 1:33 hours acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbbb0/208 (11 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0xc800! 0xcc800/0x800! 0xcd000/0x800 0xcd800/0x800 0xce000/0x800 0xce800/0x800 0xcf000/0x800 0xcf800/0x800 cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82830M Host" rev 0x04 vga1 at pci0 dev 2 function 0 "Intel 82830M Video" rev 0x04 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xe0000000, size 0x8000000 inteldrm0 at vga1: irq 11 drm0 at inteldrm0 "Intel 82830M Video" rev 0x00 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 11 ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42 pci1 at ppb0 bus 1 xl0 at pci1 dev 0 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 11, address 00:0b:db:0b:08:00 exphy0 at xl0 phy 24: 3Com internal media interface cbb0 at pci1 dev 1 function 0 "TI PCI1410 CardBus" rev 0x02: irq 11 ral0 at pci1 dev 3 function 0 "Ralink RT2561S" rev 0x00: irq 11, address 00:14:85:d3:f3:53 ral0: MAC/BBP RT2561C, RF RT2527 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20 pcmcia0 at cardslot0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 ignored (disabled) auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: irq 11, ICH3 AC97 ac97: codec id 0x4352595d (Cirrus Logic CS4205 rev 5) ac97: codec features mic channel, tone, simulated stereo, bass boost, 20 bit DAC, 18 bit ADC, SRS 3D audio0 at auich0 "Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 biomask ef65 netmask ef65 ttymask ffff mtrr: Pentium Pro MTRR support uhci1 at cardbus0 dev 0 function 0 "VIA VT83C572 USB" rev 0x62: irq 11 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 uhci2 at cardbus0 dev 0 function 1 "VIA VT83C572 USB" rev 0x62: irq 11 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 ehci0 at cardbus0 dev 0 function 2 "VIA VT6202 USB" rev 0x65: irq 11 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 "VIA EHCI root hub" rev 2.00/1.00 addr 1 uhidev0 at uhub0 port 1 configuration 1 interface 0 "Microsoft Basic Optical Mouse" rev 1.10/0.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse1 at ums0 mux 0 umass0 at uhub3 port 1 configuration 1 interface 0 "SanDisk U3 Cruzer Micro" rev 2.00/2.00 addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: SCSI0 0/direct removable sd0: 1907MB, 512 bytes/sec, 3907583 sec total cd0 at scsibus0 targ 1 lun 1: SCSI0 5/cdrom removable softraid0 at root root on wd0a swap on wd0b dump on wd0b ugen0 at uhub2 port 1 "OmniVision OV511" rev 1.00/1.00 addr 2 auich0: measured ac97 link rate at 47759 Hz, will use 48000 Hz