(--) checkDevMem: using aperture driver /dev/xf86 (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32) X.Org X Server 1.5.2 Release Date: 10 October 2008 X Protocol Version 11, Revision 0 Build Operating System: OpenBSD 4.4 amd64 Current Operating System: OpenBSD furball.azbsd.org 4.4 gx745#0 amd64 Build Date: 20 November 2008 12:16:50PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 23 06:09:57 2008 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Big20" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (==) Not automatically adding devices (==) Not automatically enabling devices (==) Including the default font path /usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/OTF,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/. (**) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/, /usr/local/openoffice/share/fonts/truetype, /usr/local/lib/X11/fonts/mscorefonts, /usr/local/lib/X11/fonts/arabeyes, /usr/local/lib/X11/fonts/freefont, /usr/local/lib/X11/fonts/Liberation, /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ (**) ModulePath set to "/usr/X11R6/lib/modules" (II) Loader magic: 0x772c20 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 4.1 X.Org XInput driver : 2.1 X.Org Server Extension : 1.1 X.Org Font Renderer : 0.6 (II) Loader running on openbsd (--) PCI:*(0@0:2:0) Intel 82Q965 Video rev 2, Mem @ 0xfea00000/1048576, 0xd0000000/268435456, I/O @ 0x0000ecb8/8 (--) PCI: (0@0:2:1) Intel 82Q965 Video rev 2, Mem @ 0xfeb00000/1048576 (II) System resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "freetype" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (II) Loading extension XFree86-DRI (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (==) AIGLX enabled (==) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts//libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.5.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.6 (II) Loading font FreeType (II) LoadModule: "intel" (II) Loading /usr/X11R6/lib/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.5.2, module version = 2.4.2 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 4.1 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.3.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.1 (II) LoadModule: "kbd" (II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.3.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.1 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.1.0 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.5.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 4.1 (==) intel(0): Depth 24, (==) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 965Q (--) intel(0): Chipset: "965Q" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xFEA00000 (II) intel(0): 2 display pipes available. (==) intel(0): Using EXA for acceleration (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules//libint10.so (II) intel(0): initializing int10 (==) intel(0): Write-combining range (0xa0000,0x20000) was already clear (==) intel(0): Write-combining range (0xc0000,0x40000) was already clear (WW) intel(0): Bad V_BIOS checksum (II) intel(0): Primary V_BIOS segment is: 0xc000 (==) intel(0): Write-combining range (0x0,0x1000) was already clear (II) intel(0): VESA BIOS detected (II) intel(0): VESA VBE Version 3.0 (II) intel(0): VESA VBE Total Mem: 7616 kB (II) intel(0): VESA VBE OEM: Intel(r)Broadwater-G Graphics Chip Accelerated VGA BIOS (II) intel(0): VESA VBE OEM Software Rev: 1.0 (II) intel(0): VESA VBE OEM Vendor: Intel Corporation (II) intel(0): VESA VBE OEM Product: Intel(r)Broadwater-G Graphics Controller (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (==) intel(0): Write-combining range (0x0,0x1000) was already clear (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Med17 (**) intel(0): Option "LeftOf" "Big20" (**) intel(0): Option "Enable" "true" (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. (II) intel(0): Output TMDS-1 using monitor section Big20 (**) intel(0): Option "Enable" "true" (II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz (II) intel(0): SDVOB: 1 input channel (II) intel(0): SDVOB: TMDS0 output reported (II) intel(0): Current clock rate multiplier: 8 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "DEL", prod id 16402 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): EDID vendor "DEL", prod id 16402 (II) intel(0): I2C device "SDVOB DDC Bus:ddc2" registered at address 0xA0. (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "DEL", prod id 16435 (II) intel(0): Output VGA enabled by config file (II) intel(0): Output TMDS-1 enabled by config file (II) intel(0): Using user preference for initial modes (II) intel(0): Output VGA using initial mode 1280x1024 (II) intel(0): Output TMDS-1 using initial mode 1280x1024 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 7676 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Intel XvMC decoder disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (**) intel(0): Display dimensions: (340, 270) mm (**) intel(0): DPI set to (221, 98) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/X11R6/lib/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.5.2, module version = 2.4.0 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000b00 (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 1006592 total, 0 used (II) intel(0): I830CheckAvailableMemory: 4026368 kB available drmOpenDevice: node name is /dev/drm0 drmOpenDevice: open result is 13, (OK) drmOpenDevice: node name is /dev/drm0 drmOpenDevice: open result is 13, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/drm0 drmOpenDevice: open result is 13, (OK) drmOpenByBusid: drmOpenMinor returns 13 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] DRM interface version 1.2 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (EE) intel(0): [drm] drmAddMap(regs) failed (II) intel(0): [drm] removed 1 reserved context for kernel (II) intel(0): [drm] unmapping 8192 bytes of SAREA 0x40000000 at 0x208d66000 (II) intel(0): [drm] Closed DRM master. (WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 2 failed (Bad address) (WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 3 failed (Bad address) (WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 4 failed (Bad address) (II) intel(0): Page Flipping disabled (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) EXA(0): Offscreen pixmap area of 38707200 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): Current clock rate multiplier: 8 (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x023b0000 (pgoffset 9136) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB) (II) intel(0): 0x00032000-0x00043fff: exa G965 state buffer (72 kB) (II) intel(0): 0x00044000-0x00044fff: overlay registers (4 kB) (II) intel(0): 0x00100000-0x023affff: front buffer (35520 kB) X tiled (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x023b0000-0x04899fff: exa offscreen (37800 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output TMDS-1 is connected to pipe B (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (**) Option "dpms" "true" (**) intel(0): DPMS enabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: Failed (WW) intel(0): Option "Enable" is not used (--) RandR disabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) intel(0): Setting screen physical size to 676 x 270 (**) Option "Protocol" "wsmouse" (**) Mouse0: Protocol: wsmouse (**) Option "CorePointer" (**) Mouse0: always reports core events (**) Option "Device" "/dev/wsmouse" (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5 6 7" (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7 (**) Mouse0: Buttons: 11 (**) Option "CoreKeyboard" (**) Keyboard0: always reports core events (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (--) Keyboard0: using wscons layout us (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (II) evaluating device (Mouse0) (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) evaluating device (Keyboard0) (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (II) intel(0): EDID vendor "DEL", prod id 16402 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): EDID vendor "DEL", prod id 16402 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "DEL", prod id 16435 (II) intel(0): EDID vendor "DEL", prod id 16402 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): EDID vendor "DEL", prod id 16402 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "DEL", prod id 16435 (II) intel(0): EDID vendor "DEL", prod id 16402 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): EDID vendor "DEL", prod id 16402 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "DEL", prod id 16435 (II) intel(0): EDID vendor "DEL", prod id 16402 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): EDID vendor "DEL", prod id 16402 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "DEL", prod id 16435 (EE) intel(0): underrun on pipe A! (II) intel(0): EDID vendor "DEL", prod id 16402 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): EDID vendor "DEL", prod id 16402 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "DEL", prod id 16435 (II) 3rd Button detected: disabling emulate3Button