OpenBSD 3.9-current (GENERIC+NTFS) #6: Fri Jul 21 09:21:53 MST 2006 root@f675a-pc01.dhcp.asu.edu.:/usr/src/sys/arch/i386/compile/GENERIC+NTFS cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16 real mem = 1063378944 (1038456K) avail mem = 962174976 (939624K) using 4256 buffers containing 53272576 bytes (52024K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 03/31/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (73 entries) bios0: Dell Inc. OptiPlex GX620 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfed10/240 (13 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GH LPC" rev 0x00) pcibios0: PCI bus #3 is the last bus bios0: ROM list: 0xc0000/0xa800! 0xca800/0x2000! 0xcc800/0x3800 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GP" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02: aperture at 0xfeb00000, size 0x10000000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "Intel 82945G Video" rev 0x02 at pci0 dev 2 function 1 not configured ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 pci1 at ppb0 bus 1 bge0 at pci1 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1 (0x4001): irq 11, address 00:12:3f:a5:31:05 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01 pci2 at ppb1 bus 2 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 9 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 5 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 3 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 10 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 9 usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1 pci3 at ppb2 bus 3 auich0 at pci0 dev 30 function 2 "Intel 82801GB AC97" rev 0x01: irq 10, ICH7 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using irq 5 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: wd0: 16-sector PIO, LBA, 76293MB, 156250000 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: SMI iic0 at ichiic0 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo biomask f76d netmask ff6d ttymask ffef pctr: user-level cycle counter enabled uhub5 at uhub4 port 1 uhub5: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2 uhub5: 4 ports with 4 removable, self powered, multiple transaction translators uhub6 at uhub4 port 2 uhub6: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 3 uhub6: 4 ports with 4 removable, self powered, multiple transaction translators uhidev0 at uhub1 port 2 configuration 1 interface 0 uhidev0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 uhidev1 at uhub2 port 2 configuration 1 interface 0 uhidev1: Dell Dell USB Keyboard, rev 1.10/2.00, addr 2, iclass 3/1 ukbd0 at uhidev1: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 WARNING: / was not properly unmounted